Filter
Top Products
7-4
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 7 Interface Profiles
Creating an ATM Interface Profile
Figure 7-2 ATM Interface Configuration Profile Window (Configuration (1) Tab)
See “ATM Interface Configuration Profile Window—Detailed Description” section on page 7-7 for
further information on the parameters displayed in this window.
Step 2 Click Create Profile. A Prompt window appears (see Figure 7-3) for you to enter a name for the new
profile.
Note Each profile must have a unique name. Do not insert spaces into a profile name.
When you choose a profile name, it is recommended to use a naming convention
that describes the profile type. For example, an ATM profile might be called ATM1.
Not applicable for Cisco 12000/10720 Router Manager