Filter
Top Products
CHAPTER
17-1
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
17
MPLS Trap Management
This chapter describes MPLS traps that can be configured using the Cisco 12000/10720 Router Manager
application using the MPLS Trap Configuration window.
The MPLS Trap Configuration window allows you to enable/disable MPLS related Traps on a managed
Cisco 12000 Series Router or a 10720 Router. The MPLS based traps that can be configured through the
Cisco 12000/10720 Router Manager application are as follows:
• LDP traps
• VPN traps
• Traffic engineering traps
Cisco 12000/10720 Router Manager is capable of receiving the above-mentioned traps and address as
alarms with a predefined severity against the respective chassis objects.
This chapter provides the following information:
• MPLS Traps Supported by the C12000/10720 Router Manager
• Enabling/Disabling Traps on the Device
• MPLS CLI Troubleshooting Services
MPLS Traps Supported by the C12000/10720 Router Manager
Table 17-1 provides a lists of MPLS traps with the detailed description, severity and Clear correlation
information:
Table 17-1 MPLS Traps/Alarms Raised
Trap Alarm Description Severity Clears
LdpSessionUp LDP Session Up between
<LdpEntityLdpId> <LdpEntityIndex>
<LdpPeerLdpId>
Normal LdpSessionUp and
LdpSessionDown
LdpSessionDown LDP Session Down between
<LdpEntityLdpId> <LdpEntityIndex>
<LdpPeerLdpId>
Major LdpSessionDown