Filter
Top Products
15-8
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter15 MPLS Management
Fault Management for MPLS LSR Interfaces
MPLS
The MPLS area displays the following information:
Min Label In—This is the minimum value of an MPLS label that this LSR is willing to receive on this
interface.
Max Label In—This is the maximum value of an MPLS label that this LSR is willing to receive on this
interface.
Available Buffer—This value reflects the total amount of buffer space available on this interface.
Available Bandwidth—This value indicates the total amount of available bandwidth available on this
interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between
the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth.
Label Participation Type—Per platform or per interface setting.
Conf Storage Type—Displays the storage type for this entry.
Min Label Out—This is the minimum value of an MPLS label that this LSR is willing to send on this
interface.
Max Label Out—This is the maximum value of an MPLS label that this LSR is willing to send on this
interface.
Total Buffer—This value indicates the total amount of buffer space allocated for this interface.
Total Bandwidth—This value indicates the total amount of usable bandwidth on this interface and is
specified in kilobits per second (Kbps).
MPLS Interface Information
The MPLS Interface Information window displays the MPLS configuration and performance details for
any MPLS enabled interfaces and sub-interfaces on a managed chassis (12000 Series and 10720). The
MPLS Interface Information window also helps to overcome the limitations with MPLS Interface Status
and MPLS Interface Performance windows which cannot be used for viewing the status and performance
details of MPLS interfaces and sub-interfaces.
The MPLS Interface Information section covers the following:
• Viewing the MPLS Interface Information Window
• MPLS Interface Information Window—Detailed Description
Viewing the MPLS Interface Information Window
To view the MPLS Interface Information window, proceed as follows:
Step 1 Right click on an appropriate object and choose Cisco 12000/10720 Manager> Fault> Chassis>
MPLS> MPLS Interface Information. See Table 15-1 on page 15-3 for information on which objects
allow you to launch the Interface Information window. The MPLS Interface Information window
appears, with the Interface Setup tab displayed.