Cisco Systems 12000/10700 V3.1.1 Router User Manual


 
18-4
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 18 Fault Management
Cisco 12000/10720 Router Trap Support
Note Temperature traps include the affected slot in the alarm description.
As can be seen from the table, Cisco EMF alarms may be cleared by other alarms. The general pattern
is that an alarm clears alarms of the same or higher severity. All other alarms should be cleared manually.
Fan Normal Fan Tray 1, normal Normal Normal, Critical,
Shutdown, Warning,
NotPresent
Fan Warning Fan Tray 1, warning Warning Critical, Shutdown,
Warning, NotPresent
Fan Critical Fan Tray 1, critical Critical Critical, Shutdown,
Warning, NotPresent
Fan Shutdown Fan Tray 1, shutdown Critical Critical, Shutdown,
Warning, NotPresent
Fan Not Present Fan Tray 1, notPresent Informational Critical, Shutdown,
Warning, NotPresent
Power Supply Normal Power Supply 1, normal Normal Normal, Critical,
Shutdown, Warning,
NotPresent
Power Supply Warning Power Supply 1, warning Warning Critical, Shutdown,
Warning, NotPresent
Power Supply Critical Power Supply 1, critical Critical Critical, Shutdown,
Warning, NotPresent
Power Supply Shutdown Power Supply 1, shutdown Critical Critical, Shutdown,
Warning, NotPresent
Power Supply Not Present Power Supply 1, notPresent Informational Critical, Shutdown,
Warning, NotPresent
BGP Connection Established BGP Connection Established with Peer
<peer-IP-Address>, Connection is in
<peer-state> State
Normal BGP Connection
Established, BGP
Connection Broken
BGP Connection Broken BGP Connection Broken with Peer
<peer-IP-Address>, Connection is in
<peer-state> State
Major BGP Connection
Broken
FlashDeviceChange A Flash Device has been inserted or removed
from the chassis
Informational FlashDeviceChange
Table 18-2 Monitored Attributes for a GRP Module (continued)
Trap Alarm Description Severity Clears