Filter
Top Products
14-21
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Status
Figure 14-14 BGP Status—Redistribution Tab
BGP Status Window—Detailed Description
The BGP Status window displays four tabs: BGP-Details, Network, Neighbor and Redistribution.
BGP-Details
The BGP-Details tab displays two areas: BGP General and BGP Information
BGP General
Local Autonomous System—The id of the BGP process running in the device. If the value is 0 it means
no BGP process is running on the device.
BGP Information
BGP Identifier—It is the Router Identifier for the BGP speaking router. By default, BGP Identifier is set
to IP address of the loopback interface if it is configured otherwise it is the highest IP address configured
for a physical interface on that router.
BGP Version—It displays the supported BGP version.
BGP Synchronization—It displays whether BGP synchronization with IGP is enabled or disabled.