Filter
Top Products
15-12
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter15 MPLS Management
Fault Management for MPLS LSR Interfaces
Select Interface
The Select Interface area displays the following information:
MPLS Interface/Subinterface list—Lists all the MPLS enabled interfaces and MPLS enabled
sub-interfaces on the selected chassis.
In Octets—Displays the total number of octets received on the selected interface including framing
characteristics.
Out Octets—Displays the total number of octets transmitted from the interface including framing
characteristics.
In Unicast Packets—Displays the number of packets delivered by this sub-layer to a higher sub-layer,
which were not addressed to a multicast or broadcast address at this sub-layer.
Out Unicast Packets—Displays the total number of packets that higher level protocols requested be
transmitted and which were not addressed to a multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
In Octets (64 bit)—Displays the total number of 64 bit octets received on the selected interface including
framing characteristics.
Out Octets (64 bit)—Displays the total number of 64 bit octets transmitted from the interface including
framing characteristics.
In Unicast Packets (64 bit)—Displays the number of 64 bit packets delivered by this sub-layer to a higher
sub-layer, which were not addressed to a multicast or broadcast address at this sub-layer.
Out Unicast Packets (64 bit)—Displays the total number of 64 bit packets that higher level protocols
requested be transmitted and which were not addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not sent.
MPLS Performance Tab
The Interface Performance tab (see Figure 15-6) displays a single Select Interface area.