12-12
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 12 Managing ATM Connections
Managing ATM QoS Profiles
Upload Status—Upload status messages for the first selected chassis.
Upload—Choose one or more chassis and choose Upload to initiate the upload of the ATM connections
and QoS profiles from all the selected chassis.
Managing ATM QoS Profiles
The ATM QoS Profile Configuration window allows you to create and save ATM QoS profiles. ATM
QoS profiles are stored in Cisco 12000/10720 Router Manager and the associated fields are created on
the device when the connection (PVC or SVC) is created.
Note ATM QoS profiles can only be edited when they are not applied, that is, if any connections are using the
profile, you cannot edit the profile. You can view which specific connections are using a certain profile
by running a Cisco EMF query against the profile name (see Cisco Element Management Framework
User Guide for further details).
This section covers the following areas:
• Creating ATM QoS Profiles
• Editing an ATM QoS Profile
• Deleting an ATM QoS Profile
• ATM QoS Profiles Configuration Window—Detailed Description
Creating ATM QoS Profiles
To create ATM QoS profiles, proceed as follows:
Step 1 Right-click on an interface, then choose Cisco 12000/10720 Manager>Configuration>
Interface>QoS> ATM QoS Profile Configuration. See Table 12-6 on page 12-18 for information on
the objects that allow you to launch the ATM QoS Profiles window.