16-13
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
Associating a VRF Policy with an Interface
Associating VRF Policies
To associate a the VRF policy with one or more selected interfaces, proceed as follows:
Step 1 Right click on the chassis object and choose Configuration> Interface> MPLS> VRF Association.
See Table 16-1 on page 16-2 for information on which objects allow you to launch the VRF Association
window. The VRF Association window appears, with the VRF tab displayed:
Figure 16-10 VRF Association Window
Step 2
Choose a Chassis, Module and Interface from the list displayed at the left of the window. For further
information, see the “VRF Association Window—Detailed Description” section on page 16-14.
Step 3 Choose a VRF from the list of VRF policies in the Available Policies area.
Step 4 Click the Apply button to associate the selected VRF policy with the selected interface. An Action report
window appears to inform you that the VRF policy has been associated successfully. An error message
appears if the VRF policy is already applied to the interface.