Filter
Top Products
5. Peripheral Devices
5 - 7
5-4 Selection of control power supply
For the control power supply of MDS-R Series, choose the stabilized power supply that satisfies the
specifications below.
(1) Power supply specification
External power supply unit
Output voltage
24VDC ±10%
Ripple
200mV max.
Output current
Select the external power supply unit that satisfies the current or rush
current specification of the drive unit control power supply
specification.
If the power supply is supplied to multiple drive units, select a product
that satisfies the total of the drive units.
Circuit
protector
DC24V
Stabilized power supply
ACIN
DCOUT
CN22
Servo drive unit
MDS-R
Circuit protector
or
Protection fuse
CAUTION
1. Do not damage, apply excessive stress, place heavy things on or sandwich
the cables, as this may lead to electric shocks.
2. Separate the signal wire from the drive line/power line when wiring.
3. Do not connect or disconnect the connection cables between each unit while
the power is ON.