Filter
Top Products
Appendix 1. Cable and Connector Specifications
A1 - 14
Appendix 1-4 Cable and connector assembly
Appendix 1-4-1 CM10-SP**S plug connector
This section explains how to assemble the wire to CM 10 angle plug connector.
(1) Cutting a cable
Cut the cable to the following dimensions:
Cable length
* Cable length after cutting = CM10 - SP**S：35mm + cable length
= 35mm + cable length
(2) Inserting parts
Insert the clamp nut, cable clamp, bushing and back shell in to the cable.
(Note) Take care not to insert them upside down
Cable clamp
Cable
Bushing
Back shell
Clamp nut
(3) Stripping a cable
Strip the cable to a length 20mm.
Strip the core wire to a length 6mm.
20
Sheath
6
Core wire