Filter
Top Products
Appendix 1. Cable and Connector Specifications
A1 - 25
(7) Tightening angle back shell
[1] Temporarily tighten the back shell coupling on the angle back shell.
* To prevent loosening, Adhesive should be applied to the angle back shell.
[2] Set the angle back shell on the tightening guide.
[3] Set the back shell wrench on the back shell coupling.
[4] With the wrench, tighten the back shell coupling on the angle back shell.
Recommended tightening torque: 5Nm
(Note) Accurately fit the wrench on the back shell coupling.
To remove, take the reverse steps.
* Recommendation
Adhesive
(2 threads around
the circumference)
Tempora ry
tightening
Back shell
coupling
Tightening guide
Set
Tightening guide
Torque wrench
Tighten
Angle back shell
wrench
19
17
* Referential dimensions for back
shell tightening guide
Back shell width
22
Thickness:
10 or more
* Recommendation:
Tightening guide
(357J-50508T)
Recommended jigs and tools: Back shell wrench (357J-51333T)
Bit (357J-51344T)
Torque wrench (CL6N x 8D,Tonichi Mfg.)
* Recommended tightening guide: (357J-50508T)
* Recommended adhesive: screw lock 1401B (Threee bond Co,Ltd)
Set
A
ngle back shell
(Note) To change the back shell angle, adjust the toothing position of the plug shell
and back shell.