A SERVICE OF

logo

Chapter 7 Tutorials
ZyWALL USG 50 User’s Guide
153
7.12.2 Configure the Policy Route
Now you need to configure a policy route that has the ZyWALL use the range of
public IP addresses as the source address for WAN to LAN traffic.
Click Configuration > Network > Routing > Add.
Although adding a description is optional, it is recommended. This example uses
LAN-to-WAN-Range.
Specifying a Source Address is also optional although recommended. This
example uses LAN_SUBNET1.
Set the Source Network Address Translation to Public-IPs and click OK.
Figure 113 Configuring the Policy Route