Chapter 11 Interfaces
ZyWALL USG 50 User’s Guide
246
11.6 VLAN Interfaces
A Virtual Local Area Network (VLAN) divides a physical network into multiple
logical networks. The standard is defined in IEEE 802.1q.
Figure 160 Example: Before VLAN
In this example, there are two physical networks and three departments A, B, and
C. The physical networks are connected to hubs, and the hubs are connected to
the router.
Alternatively, you can divide the physical networks into three VLANs.
Actions when over
% of time budget
or % of data
budget
Specify the actions the ZyWALL takes when the specified percentage
of time budget or data limit is exceeded. Enter a number from 1 to 99
in the percentage fields. If you change the value after you configure
and enable budget control, the ZyWALL resets the statistics.
Select None to not create a log when the ZyWALL takes this action,
Log to create a log, or Log-alert to create an alert log. If you select
Log or Log-alert you can also select recurring every to have the
ZyWALL send a log or alert for this event periodically. Specify how
often (from 1 to 65535 minutes) to send the log or alert.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
Table 61 Configuration > Network > Interface > Cellular > Add (continued)
LABEL DESCRIPTION
A
B
C