ZyWALL USG 50 User’s Guide
757
CHAPTER 50
Shutdown
50.1 Overview
Use this to shutdown the device in preparation for disconnecting the power. See
also Section 1.5 on page 35 for information on different ways to start and stop the
ZyWALL.
Always use the Maintenance > Shutdown > Shutdown screen or
the “shutdown” command before you turn off the ZyWALL or
remove the power. Not doing so can cause the firmware to become
corrupt.
50.1.1 What You Need To Know
Shutdown writes all cached data to the local storage and stops the system
processes.
50.2 The Shutdown Screen
To access this screen, click Maintenance > Shutdown.
Figure 446 Maintenance > Shutdown
Click the Shutdown button to shut down the ZyWALL. Wait for the device to shut
down before you manually turn off or remove the power. It does not turn off the
power.
You can also use the CLI command shutdown to shutdown the ZyWALL.