Filter
Top Products
Chapter 45 System
ZyWALL USG 50 User’s Guide
710
45.7.5 Secure Telnet Using SSH Examples
This section shows two examples using a command interface and a graphical
interface SSH client program to remotely access the ZyWALL. The configuration
and connection steps are similar for most SSH client programs. Refer to your SSH
client program user’s guide.
45.7.5.1 Example 1: Microsoft Windows
This section describes how to access the ZyWALL using the Secure Shell Client
program.
1 Launch the SSH client and specify the connection information (IP address, port
number) for the ZyWALL.
2 Configure the SSH client to accept connection using SSH version 1.
3 A window displays prompting you to store the host key in you computer. Click Yes
to continue.
Figure 415 SSH Example 1: Store Host Key
Move To change an entry’s position in the numbered list, select the method
and click Move to display a field to type a number for where you want to
put it and press [ENTER] to move the rule to the number that you typed.
# This the index number of the service control rule.
Zone This is the zone on the ZyWALL the user is allowed or denied to access.
Address This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
Action This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
Table 221 Configuration > System > SSH (continued)
LABEL DESCRIPTION