Filter
Top Products
Chapter 42 ISP Accounts
ZyWALL USG 50 User’s Guide
657
The following table describes the labels in this screen.
Table 204 Configuration > Object > ISP Account > Edit
LABEL DESCRIPTION
Profile Name This field is read-only if you are editing an existing account. Type in the
profile name of the ISP account. The profile name is used to refer to the
ISP account. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Protocol This field is read-only if you are editing an existing account. Select the
protocol used by the ISP account. Options are:
pppoe - This ISP account uses the PPPoE protocol.
pptp - This ISP account uses the PPTP protocol.
Authentication
Type
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested
by this remote node.
CHAP - Your ZyWALL accepts CHAP only.
PAP - Your ZyWALL accepts PAP only.
MSCHAP - Your ZyWALL accepts MSCHAP only.
MSCHAP-V2 - Your ZyWALL accepts MSCHAP-V2 only.
Encryption
Method
This field is available if this ISP account uses the PPTP protocol. Use the
drop-down list box to select the type of Microsoft Point-to-Point
Encryption (MPPE). Options are:
nomppe - This ISP account does not use MPPE.
mppe-40 - This ISP account uses 40-bit MPPE.
mppe-128 - This ISP account uses 128-bit MMPE.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above. The password
can only consist of alphanumeric characters (A-Z, a-z, 0-9). This field
can be blank.
Retype to
Confirm
Type your password again to make sure that you have entered is
correctly.
Server IP If this ISP account uses the PPPoE protocol, this field is not displayed.
If this ISP account uses the PPTP protocol, type the IP address of the
PPTP server.
Connection ID This field is available if this ISP account uses the PPTP protocol. Type
your identification name for the PPTP server. This field can be blank.
Service Name If this ISP account uses the PPPoE protocol, type the PPPoE service name
to access. PPPoE uses the specified service name to identify and reach
the PPPoE server. This field can be blank.
If this ISP account uses the PPTP protocol, this field is not displayed.