Filter
Top Products
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
827
%s SIP ALG has
succeeded.
The SIP ALG has been turned on or off. %s: Enable or Disable
Extra signal port of
SIP ALG has been
modified.
Extra SIP ALG port has been changed.
Signal port of SIP ALG
has been modified.
Default SIP ALG port has been changed.
Register SIP ALG extra
port=%d failed.
SIP ALG apply additional signal port failed.
%d: Port number
Register SIP ALG
signal port=%d failed.
SIP ALG apply signal port failed.
%d: Port number
Register H.323 ALG
extra port=%d failed.
H323 ALG apply additional signal port failed.
%d: Port number
Register H.323 ALG
signal port=%d failed.
H323 ALG apply signal port failed.
%d: Port number
Register FTP ALG extra
port=%d failed.
FTP ALG apply additional signal port failed.
%d: Port number
Register FTP ALG
signal port=%d failed.
FTP ALG apply signal port failed.
%d: Port number
Table 272 PKI Logs
LOG MESSAGE DESCRIPTION
Generate
X509certifiate "%s"
successfully
The router created an X509 format certificate with the
specified name.
Generate X509
certificate "%s"
failed, errno %d
The router was not able to create an X509 format certificate
with the specified name. See Table 273 on page 829 for
details about the error number.
Generate certificate
request "%s"
successfully
The router created a certificate request with the specified
name.
Generate certificate
request "%s" failed,
errno %d
The router was not able to create a certificate request with
the specified name. See Table 273 on page 829 for details
about the error number.
Generate PKCS#12
certificate "%s"
successfully
The router created a PKCS#12 format certificate with the
specified name.
Generate PKCS#12
certificate "%s"
failed, errno %d
The router was not able to create anPKCS#12 format
certificate with the specified name. See Table 273 on page
829 for details about the error number.
Table 271 NAT Logs (continued)
LOG MESSAGE DESCRIPTION