Filter
Top Products
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
801
Get server response
has failed.
The device sent packets to the server, but did not receive a
response. The root cause may be that the connection is
abnormal.
Expiration daily-
check has failed:%s.
The daily check for service expiration failed, an error message
returned by the MyZyXEL.com server will be appended to this
log.
%s: error message returned by myZyXEL.com server
Do expiration daily-
check has failed.
Because of lack must
fields.
The device received an incomplete response to the daily
service expiration check and the packets caused a parsing
error for the device.
Server setting error. The device could not retrieve the server's IP address or FQDN
from local.
Do expiration daily-
check has failed.
The daily check for service expiration failed.
Do expiration daily-
check has succeeded.
The daily check for service expiration was successful.
Expiration daily-
check will trigger PPP
interface. Do self-
check.
Before the device sends an expiration day check packet, it
needs to check whether or not it will trigger a PPP connection.
System bootup. Do
expiration daily-
check.
The device processes a service expiration day check
immediately after it starts up.
After register. Do
expiration daily-
check immediately.
The device processes a service expiration day check
immediately after device registration.
Time is up. Do
expiration daily-
check.
The processes a service expiration day check every 24 hrs.
Read MyZyXEL.com
storage has failed.
Read data from EEPROM has failed.
Open /proc/MRD has
failed.
This error message is shown when getting MAC address.
IDP service has
expired.
The IDP service period has expired. The device can find this
through either a service expiration day check via
MyZyXEL.com server or by the device’s own count.
Content-Filter
service has expired.
The content filtering service period has expired. The device
can find this through either a service expiration day check via
MyZyXEL.com server or by the device’s own count.
Unknown TLS/SSL
version: %d.
The device only supports SSLv3 protocol. %d: SSL version
assigned by client.
Load trusted root
certificates has
failed.
The device needs to load the trusted root certificate before
the device can verify a server's certificate. This log displays if
the device failed to load it.
Certificate has
expired.
Verification of a server’s certificate failed because it has
expired.
Table 259 myZyXEL.com Logs (continued)
LOG MESSAGE DESCRIPTION