Filter
Top Products
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
833
"SIM card of interface
cellular%d in %s is
damaged or not
inserted. Please
remove the device,
then check the SIM
card.
The SIM card for the cellular device associated with the listed
cellular interface (%d) cannot be detected. The SIM card may
be missing, not inserted properly, or damaged. Remove the
device and check its SIM card. If it does not appear to be
damaged, try re-inserting the SIM card.
"SIM card of interface
cellular%d in %s is
locked. Please enter
PUK code to unlock.
The SIM card for the cellular device associated with the listed
cellular interface (%d) is locked. This may be because the PIN
code was entered incorrectly more than three times. You need
to enter the PUK code to unlock the SIM card. .
"Incorrect PIN code of
interface cellular%d.
Please check the PIN
code setting.
The listed cellular interface (%d) does has the wrong PIN
code configured.
"Unable to query the
signal quality from
the device in %s.
Please try to remove
then insert the
device.
The ZyWALL could not check the signal strength for the listed
cellular interface (%d). This could be due to an error or being
out of range of the ISP’s cellular station.
"Interface cellular%d
cannot connect to the
service provider.
The listed cellular interface (%d) cannot connect to the ISP.
This could be due to an error or being out of range of the
ISP’s cellular station.
"Interface cellular%d
is configured with
incorrect APN.
The listed cellular interface (%d) does not have the correct
APN (Access Point Name) configured.
"Interface cellular%d
is configured with
incorrect phone
number.
The listed cellular interface (%d) does not have the correct
phone number configured.
"Interface cellular%d
is configured with
incorrect username or
password.
The listed cellular interface (%d) does not have the correct
user name and password configured.
"Interface cellular%d
is configured with
device %s, but current
inserted device is %s.
The listed cellular interface (%d) is configured for a particular
cellular device (first %s), but a different cellular device
(second %s) is inserted.
"Cellular device [%s
%s] has been inserted
into %s.
The cellular device (identified by its manufacturer and model)
has been inserted in or connected to the specified slot.
"Cellular device [%s
%s] has been removed
from %s.
The cellular device (identified by its manufacturer and model)
has been removed from the specified slot.
Table 274 Interface Logs (continued)
LOG MESSAGE DESCRIPTION