Filter
Top Products
Chapter 9 Monitor
ZyWALL USG 50 User’s Guide
177
Traffic Type Select the type of report to display. Choices are:
Host IP Address/User - displays the IP addresses or users with the
most traffic and how much traffic has been sent to and from each one.
Service/Port - displays the most-used protocols or service ports and
the amount of traffic for each one.
Web Site Hits - displays the most-visited Web sites and how many
times each one has been visited.
Each type of report has different information in the report (below).
Refresh Click this button to update the report display.
Flush Data Click this button to discard all of the screen’s statistics and update the
report display.
These fields are available when the Traffic Type is Host IP Address/
User.
# This field is the rank of each record. The IP addresses and users are
sorted by the amount of traffic.
IP Address/
User
This field displays the IP address or user in this record. The maximum
number of IP addresses or users in this report is indicated in Table 30 on
page 178.
Direction This field indicates whether the IP address or user is sending or receiving
traffic.
Ingress- traffic is coming from the IP address or user to the ZyWALL.
Egress - traffic is going from the ZyWALL to the IP address or user.
Amount This field displays how much traffic was sent or received from the
indicated IP address or user. If the Direction is Ingress, a red bar is
displayed; if the Direction is Egress, a blue bar is displayed. The unit of
measure is bytes, Kbytes, Mbytes or Gbytes, depending on the amount
of traffic for the particular IP address or user. The count starts over at
zero if the number of bytes passes the byte count limit. See Table 30 on
page 178.
These fields are available when the Traffic Type is Service/Port.
# This field is the rank of each record. The protocols and service ports are
sorted by the amount of traffic.
Service/Port This field displays the service and port in this record. The maximum
number of services and service ports in this report is indicated in Table
30 on page 178.
Protocol This field indicates what protocol the service was using.
Direction This field indicates whether the indicated protocol or service port is
sending or receiving traffic.
Ingress - traffic is coming into the router through the interface
Egress - traffic is going out from the router through the interface
Table 29 Monitor > System Status > Traffic Statistics (continued)
LABEL DESCRIPTION