Filter
Top Products
Chapter 9 Monitor
ZyWALL USG 50 User’s Guide
208
The Web Configurator saves the filter settings if you leave the View Log screen
and return to it later.
Priority This field displays the priority of the log message. It has the same range
of values as the Priority field above.
Category This field displays the log that generated the log message. It is the same
value used in the Display and (other) Category fields.
Message This field displays the reason the log message was generated. The text
“[count=x]”, where x is a number, appears at the end of the Message
field if log consolidation is turned on (see Log Consolidation in Table
230 on page 729) and multiple entries were aggregated to generate into
this one.
Source This field displays the source IP address and the port number in the
event that generated the log message.
Destination This field displays the destination IP address and the port number of the
event that generated the log message.
Note This field displays any additional information about the log message.
Table 48 Monitor > Log (continued)
LABEL DESCRIPTION