Filter
Top Products
Chapter 8 Dashboard
ZyWALL USG 50 User’s Guide
159
Device This field displays the name of the device connected to the extension slot
(or none if no device is detected).
Status This field displays the current status of each interface or device installed
in a slot. The possible values depend on what type of interface it is.
For Ethernet interfaces:
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface does not have any physical ports
associated with it or the Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected.
This field displays the port speed and duplex setting (Full or Half).
For cellular (3G) interfaces, see Section 11.5 on page 237 for the status
that can appear.
Zone This field displays the zone to which the interface is currently assigned.
IP Address/
Mask
This field displays the current IP address and subnet mask assigned to
the interface. If the interface is a member of an active virtual router, this
field displays the IP address it is currently using. This is either the static
IP address of the interface (if it is the master) or the management IP
address (if it is a backup).
Device This identifies a device installed in one of the ZyWALL’s extension slots
or USB ports.
Device
Information
System
Name
This field displays the name used to identify the ZyWALL on any
network. Click the icon to open the screen where you can change it. See
Section 45.2 on page 676.
Model
Name
This field displays the model name of this ZyWALL.
Serial
Number
This field displays the serial number of this ZyWALL.
MAC
Address
Range
This field displays the MAC addresses used by the ZyWALL. Each physical
port has one MAC address. The first MAC address is assigned to physical
port 1, the second MAC address is assigned to physical port 2, and so
on.
Firmware
Version
This field displays the version number and date of the firmware the
ZyWALL is currently running. Click the icon to open the screen where
you can upload firmware. See Section 47.3 on page 744.
System
Resources
CPU Usage This field displays what percentage of the ZyWALL’s processing capability
is currently being used. Hover your cursor over this field to display the
Show CPU Usage icon that takes you to a chart of the ZyWALL’s recent
CPU usage.
Memory
Usage
This field displays what percentage of the ZyWALL’s RAM is currently
being used. Hover your cursor over this field to display the Show
Memory Usage icon that takes you to a chart of the ZyWALL’s recent
memory usage.
Table 19 Dashboard (continued)
LABEL DESCRIPTION