Chapter 45 System
ZyWALL USG 50 User’s Guide
677
a software mechanism to set the time manually or get the current time and date
from an external server.
To change your ZyWALL’s time based on your local time zone and date, click
Configuration > System > Date/Time. The screen displays as shown. You can
manually set the ZyWALL’s time and date or have the ZyWALL get the date and
time from a time server.
Figure 383 Configuration > System > Date and Time
The following table describes the labels in this screen.
Table 210 Configuration > System > Date and Time
LABEL DESCRIPTION
Current Time and
Date
Current Time This field displays the present time of your ZyWALL.
Current Date This field displays the present date of your ZyWALL.
Time and Date
Setup
Manual Select this radio button to enter the time and date manually. If you
configure a new time and date, time zone and daylight saving at the
same time, the time zone and daylight saving will affect the new time
and date you entered. When you enter the time settings manually, the
ZyWALL uses the new setting once you click Apply.
