Filter
Top Products
Workman HD SeriesPage 6 − 42Drive Train
8. Assemble countershaft:
A. Use a press to install new bearings (item 15) onto
countershaft.
B. Install collar and snap ring.
C. Install washer and gear. Apply moly disulfide
grease into bushing of countershaft gear before
installing. Oil groove on washer must face the gear.
D. Install collar−spline and snap ring.
E. Install shifter onto collar−spline.
F. Install snap ring, washer and inner race. Oil
groove on washer must face the gear.
G. Install gear.
H. Install washer and snap ring. Oil groove on wash-
er must face the gear.
I. Install washer and a new bearing (item 1) using a
press.
1. Bearing
2. Thrust washer
3. Snap ring
4. Thrust washer
5. Gear
6. Inner race
7. Thrust washer
8. Snap ring (2)
9. Hi−Lo shifter
10. Collar spline
11. Gear
12. Washer
13. Snap ring
14. Collar
15. Bearing (2)
16. Countershaft
Figure 72
12 4 689 1214
1513111075316
1. Bearing
2. Thrust washer
3. Snap ring
4. Thrust washer
5. Gear
6. Inner race
7. Thrust washer
8. Snap ring (2)
9. Hi−Lo shifter
10. Collar spline
11. Gear
12. Washer
13. Snap ring
14. Collar
15. Bearing (2)
16. Countershaft
16
15
14
13
12
11
10
8
9
8
7
5
6
4
3
2
1
Figure 73
Drive Train