Filter
Top Products
Workman HD SeriesPage 8 − 10Electrical System
Fuses
The fuse blocks are located below the center of the dash
panel.
Identification and Function (Fig. 9)
Top Row LH: Protects ignition power supply.
Top Row RH: Protects power supply for light system
(headlights, running lights and brake lights).
Second Row LH: Protects main (switched) power sup-
ply.
Second Row RH: Protects power supply for hazard
lights (if equipped).
Third Row LH: Protects power supply for engine fuel sys-
tem.
Third Row RH: Optional kit.
Fourth Row LH: Protects power supply for power point
and horn (if equipped).
Fourth Row RH: Protects power supply for 4WD differ-
ential (vehicles with 4WD).
On Workman HDX and HDX−D vehicles, an additional
30 amp fuse is located in a fuse holder near the cooling
fan. This fuse protects the power supply for the radiator
fan.
Fuse Testing
1. Make sure that ignition switch is OFF and key is re-
moved from switch.
2. Remove fuse from fuse block for testing.
3. Fuse should have continuity across the terminals.
10A 15A
10A
10A
10A
10A
4WD
15A
10A
10A
10A
15A
15A
10A
10A
LEFT RIGHT
TOP ROW
FOURTH
SECOND
THIRD
Figure 9