Filter
Top Products
Workman HD SeriesPage 6 − 26Drive Train
13.Remove roll pin from differential lock lever. Remove
lever from shaft. Loosen and remove five (5) flange
head screws. Remove L.H. side cover from transaxle
case.
14.Inspect side cover for cracks or damage and replace
if necessary.
1
2
3
1. Lever
2. Flange head screw (5)
3. L.H. Side cover
Figure 33
15.Loosen and remove four (4) flange head screws. Re-
move R.H. axle shaft assembly from transaxle case.
1
2
1. Flange head screw (4) 2. R.H. Axle shaft assy.
Figure 34
16.Remove differential gear assembly together with
fork shaft assembly.
1
2
1. Differential gear assy. 2. Fork shaft assy.
Figure 35
Drive Train