Filter
Top Products
Workman HD Series
Page 1 − 3
Safety
While Operating
1. Sit on the operator seat when starting and operating
the vehicle.
2. When starting the engine:
A. Sit on operator’s seat and engage the parking
brake.
B. Disengage PTO (if so equipped) and return hand
throttle lever to OFF position (if so equipped).
C. Make sure that hydraulic lift lever is in the neutral
position.
D. Move shift lever to NEUTRAL and depress clutch
pedal. Keep foot off accelerator pedal.
E. Turn ignition key to START.
3. Do not run engine in a confined area without ade-
quate ventilation. Exhaust fumes are hazardous and
could possibly be deadly.
4. Do not touch engine, exhaust system components,
transaxle or radiator (if equipped), while engine is run-
ning or soon after it is stopped. These areas could be hot
enough to cause burns.
5. Before getting off the seat:
A. Stop movement of the vehicle.
B. Lower bed.
C. Shut engine off and wait for all movement to stop.
D. Engage parking brake and remove key from igni-
tion switch.
6. Do not park on slopes unless wheels are chocked or
blocked.
Safety