Filter
Top Products
B-4
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide
OL-6256-17
Appendix B Product IDs for the Cisco CRS 8-Slot Line Card Chassis
Optional Line Card, PLIM, SIP, and SPA Product IDs
Table B-2 Line Card Component Product IDs
Component Product ID Description
MSC
1
FP card
LSP card
1. Refer to the product data sheet for ordering details.
CRS-MSC-B(=),
CRS-MSC-140G(=)
CRS-MSC-X (200G)
FP40
FP-140
CRS-FP-X (200G)
CRS-LSP
Cisco CRS Layer 3 modular service card
(every MSC must have an associated PLIM)
Cisco CRS Layer 3 forwarding processor
(every FP must have an associated PLIM)
Cisco label switch processor
(every LSP must have an associated PLIM)
MSC impedance carrier CRS-MSC-IMPEDANCE(=) Blank card carrier for each empty MSC slot
(required for EMI compliance and cooling)
Table B-3 PLIM Component Product IDs
Component Product ID Description
1xOC-768 PLIM 1OC768-POS-SR(=) 1-port OC-768c/STM-256c PLIM, with
short-reach optics (POS)
4xOC-192 PLIM 4OC192-POS/DPT-LR(=) 4-port OC-192c/STM-64c PLIM, with
long-reach optics (POS or DPT)
4OC192-POS/DPT-IR(=) 4-port OC-192c/STM-64c PLIM, with
intermediate-reach optics (POS or DPT)
4OC192-POS/DPT-SR(=) 4-port OC-192c/STM-64c PLIM, with
short-reach optics (POS or DPT)
4OC192-POS/DPT-VS(=) 4-port OC-192c/STM-64c PLIM, with
very-short-reach optics (POS or DPT)
16xOC-48 PLIM 16OC48-POS/DPT(=)
POM-OC48-LR2-LC-C(=)
POM-OC48-SR-LC-C(=)
OC-48c/STM-16c PLIM, uses small form-factor
pluggable (SFP) modules (POS or DPT)
The PLIM uses 1 to 16 single-mode, long- and
short-reach optic modules (mixing allowed):
• Long-reach optics (POM-OC48-LR2-LC-C=)
• Short-reach optics (POM-OC48-SR-LC-C=)
8x10-GE XENPAK
PLIM
8-10GBE(=)
CRS-XENPAK10GB-LR(=)
10-GE PLIM, uses XENPAK optic modules.
The PLIM uses 1 to 8 single-mode, long-reach
optic modules:
Long-reach optics (CRS-XENPAK10GB-LR=)
8x10-GE and
4x10-GE XFP
PLIMs
8-10GBE-WL-XFP(=)
4-10GBE-WL-XFP(=)
10-GE PLIM, uses XFP optic modules.
These PLIMs use 1 to 8 (or 1 to 4) single-mode,
XFP optic modules.