Filter
Top Products
2-50
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide
OL-6256-17
Chapter 2 Installing and Removing Power Components
How to Install or Remove Modular Configuration Power Components
Figure 2-38 Securing Power Supplies to Cross Bracket to Rear Mounting Brackets
Step 5 Using a 10-mm wrench on the bolt side and a 10-mm wrench on the nut side, remove the nut and bolt
that secure the cross bracket to the chassis. See Figure 2-39. Remove the cross bracket from the
mounting studs.
Figure 2-39 Removing Cross Bracket Nut and Bolt
1 Power shelf mounting screws, two slotted screws per shelf
2 M6 Hex head bolts to secure power shelf, four per shelf
208425
2 222222 2
111 1
1 Nut/bolt to remove 2 10-mm wrench 3 10-mm wrench
208429
1
2 3