Filter
Top Products
2-26
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide
OL-6256-17
Chapter 2 Installing and Removing Power Components
How to Install or Remove Modular Configuration Power Components
Installing a Modular Configuration Power Shelf
This section describes how to install a modular configuration power shelf.
The modular configuration power shelf is installed into the front of the chassis. Although there are
differences between the different power shelf types (AC and DC), they are installed in the same manner.
Note If you have a fixed configuration PDU installed and before you can install a modular configuration power
shelf, you must remove the fixed configuration PDU. See “Converting a Chassis from Fixed
Configuration Power to Modular Configuration Power” section on page 2-54 for more information.
Figure 2-14 shows the front view of the modular configuration AC power shelf.
Figure 2-14 Modular Configuration AC Power Shelf, Front View
207660