Filter
Top Products
2-41
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Installation Guide
OL-6256-17
Chapter 2 Installing and Removing Power Components
How to Install or Remove Modular Configuration Power Components
Figure 2-30 Sliding PM Into Power Shelf
Step 3 Flip up the ejector and with nominal install torque of 5.5 in-lb (0.62 N m) of torque, screw the PM into
the shelf (see Figure 2-30). Do not exceed an install torque value of 10 in-lb (1.13 N-m).
1 Ejector pulled away from the PM.
CISCO CRS-1
SERI
E
S
LINEC ARD CH ASS IS
254846
1