Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio upstream admission-control
102
Cisco IOS Release 12.1(5)XM
radio upstream admission-control
To specify the percentage of the overbooking rate, use the radio upstream admission-control interface
configuration command. To disable upstream admission control, use the no form of this command.
radio upstream portnum admission-control percentage
no radio upstream portnum admission-control
Syntax Description
Defaults Disabled
Command Modes Interface configuration
Command History
Examples The following example shows how to limit overbooking on upstream port 4 to 1000 percent:
Router(config-if)# radio upstream 4 admission-control 1000
portnum Specifies the upstream port.
percentage The admission control is set as a percentage of the specified upstream
channel capacity. Percentage limits overbooking. Valid values are from 100
to 10000 percent.
Release Modification
12.1(3)XQ1 This command was introduced.