Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show controllers radio downstream
115
Cisco IOS Release 12.1(5)XM
show controllers radio downstream
To display downstream port information for a wireless modem card, use the show controllers radio
downstream EXEC command. To disable this function, use the no form of this command.
show controllers radio slot/downstream-port downstream
no show controllers radio slot/downstream-port downstream
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Examples The following example shows how to display downstream port information in slot number 3, port
number 0:
Router# show controllers radio 3/0 downstream
Radio 3/0 Downstream is up
Frequency not set, Channel Width 6 MHz, 64-QAM,
Symbol Rate 5.056941 Msps
FEC ITU-T J.83 Annex B, R/S Interleave I=12, J=17
slot/downstream-port Specifies the slot and downstream port numbers of the wireless modem
card.
Release Modification
12.1(3)XQ1 This command was introduced.