Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio source-verify
95
Cisco IOS Release 12.1(5)XM
radio source-verify
To verify that only hosts that have received DHCP leases through the Cisco headend can access the
network, use the radio source-verify interface configuration command. The headend discards all
packets received from hosts that have not received DHCP-assigned addresses. To deactivate upstream
verification, use the no form of this command.
radio source-verify
no radio source-verify
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Interface configuration
Command History
Examples The following example activates upstream verification:
UBR(config-if)# radio source-verify
Release Modification
12.1(3)XQ1 This command was introduced.