Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio flap-list insertion-time
46
Cisco IOS Release 12.1(5)XM
radio flap-list insertion-time
To set the radio flap list insertion time, use the radio flap-list insertion-time global configuration
command. To disable, use the no form of this command.
radio flap-list insertion-time seconds
no radio flap-list insertion-time
Syntax Description
Defaults No default behavior or values.
Command Modes Global configuration
Command History
Examples The following example shows how to set the insertion time to 62 seconds:
Router(config)# radio flap-list insertion-time 62
Related Commands
seconds Specifies the frequency for the flap list insertion request. The valid range is
60 to 86400 seconds. When a radio subscriber unit makes an insertion
request more frequently than the amount of time defined by this command,
the radio subscriber unit is placed in the flat list for activity recording.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
clear radio flap-list Clears the current radio flap-list entries for a specific subscriber unit or all
subscriber units.
radio flap-list aging Specifies the number of days to record and retain flapping activity on a radio
subscriber unit in the flap-list table.
radio flap-list
miss-threshold
Sets the miss-threshold for recording a flap-list event.
radio flap-list size Specifies the maximum number of the radio subscriber units to be reported
in the radio flap-list table.
show radio flap-list Displays the radio flap list of a wireless modem card.