Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio downstream annex B
39
Cisco IOS Release 12.1(5)XM
radio downstream annex B
To enable the MPEG framing format for a downstream port on a radio card to annex B, use the radio
downstream annex B interface configuration command. To disable, use the no form of this command.
radio downstream annex B
no radio downstream annex B
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Interface configuration
Command History
Usage Guidelines Annex B is the MCS MPEG framing format standard. The radio card downstream port and the
subscriber units on the radio network connected through these ports must be set to the same MPEG
framing format.
Examples The following example sets the MPEG framing format to annex B:
Router# radio downstream annex B
Related Commands
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
show controllers radio
slot/port downstream
Displays the MPEG framing format for the downstream port that has been
configured.