Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
microcode reload
26
Cisco IOS Release 12.1(5)XM
microcode reload
To configure the system to load its microcode from the specified slot number, use the microcode reload
privileged EXEC command.
microcode reload {all | cwrhe [slot slot]}
Syntax Description
Defaults No default behaviors or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines The microcode command is not normally needed when using the factory installed images.
Examples The following example shows how to reload a microcode in slot 6:
Router# microcode reload cwrhe slot 6
all Specifies to reload all hardware types that support downloadable
microcode.
cwrhe Specifies to reload the microcode for the wireless headend port adapter.
slot slot Specifies the slot number where to reload the microcode. Valid values are 0
to 6.
Release Modification
12.1(3)XQ1 This command was introduced.