Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show radio subscriber
159
Cisco IOS Release 12.1(5)XM
• The time the modem went offline
• The status before the modem went offline
Examples The following examples show how to display information for the show radio subscriber command:
Router# show radio subscriber
Interface Prim Online Timing Rec QoS CPE IP address MAC address
Sid State Offset Power
Radio3/0/U0 139 online 48 0.00 5 0 10.1.1.12 00b0.64ea.2410
Radio3/0/U0 140 online 50 0.00 6 0 10.1.1.4 00d0.58ec.d210
Router# show radio subscriber detail
Interface SID MAC address Max CPE Concatenation Rx SNR
Radio3/0/U0 139 00b0.64ea.2410 4 yes -----
Radio3/0/U0 140 00d0.58ec.d210 10 yes -----
Table 4 describes the fields shown in the show radio subscriber examples.
Table 4 show radio subscriber Field Descriptions
Field Description
Interface The interface on which the radio modem has an active connection.
Prim Sid The primary service identifier assigned to the modem.
SID The service identifier assigned to a modem.
Timing Offset The radio modem’s current timing adjustment.
QoS The service class assigned to the modem.
CPE The number of customer premises equipment devices (PCs,
Macintoshes, UNIX workstations, and so on) behind this radio
modem.
Max CPE The maximum number of customer premises equipment (CPE)
configured for this modem.
IP address The IP address of the modem.
MAC address The media access layer address of the modem.
Concatenation The status of concatenation.
Rx SNR This field is not currently used.
S/N Ratio This field is not currently used.