Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio shared-secret
91
Cisco IOS Release 12.1(5)XM
radio shared-secret
To activate authentication so that all subscriber units must return a known text string to register with the
Cisco headend for access to the network, use the radio shared-secret interface configuration command.
To disable the authentication, use the no form of this command.
radio shared-secret [0 | 7 |] authen-key
no radio shared-secret
Syntax Description
Defaults no radio shared-secret
Command Modes Interface configuration
Command History
Examples The following example shows how to activate authentication of a shared-secret key, and indicates that
an encrypted message will follow:
Router(config-if)# radio shared-secret 7 555533344cisco
0 Specifies that an unencrypted password will follow.
7 Specifies that an encrypted password will follow.
authen-key Specifies that the unencrypted is a shared-secret string. Valid authentication
key range is 1 to 80 characters.
Release Modification
12.1(3)XQ1 This command was introduced.