Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio ip-broadcast-echo
70
Cisco IOS Release 12.1(5)XM
radio ip-broadcast-echo
To activate the upstream IP broadcast echo so that the Cisco uBR7200 series can echo broadcast packets
back to the subscriber, use the radio ip-broadcast-echo interface configuration command. To disable
the IP broadcast echo, use the no form of this command.
radio ip-broadcast-echo
no radio ip-broadcast-echo
Syntax Description This command has no arguments or keywords.
Defaults IP broadcast echo is disabled.
Command Modes Interface configuration
Command History
Examples The following example shows how to enable IP broadcast echo:
Router(config-if)# radio ip-broadcast echo
Release Modification
12.1(3)XQ1 This command was introduced.