Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio flap-list aging
45
Cisco IOS Release 12.1(5)XM
radio flap-list aging
To specify the number of days to record and retain flapping activity on a radio subscriber unit in the
flap-list table, use the radio flap-list aging global configuration command. To disable the flap-list
recording, use the no form of this command.
radio flap-list aging days
no radio flap-list aging
Syntax Description
Defaults No default behavior or values.
Command Modes Global configuration
Command History
Examples The following example shows how to set the age of the flap list to 30 days:
CMTS01(config)# radio flap-list aging 30
Related Commands
days Specifies the number of days to record and retain flapping activity on a
flap-list table. The valid range is 1 to 60 days.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
clear radio flap-list Clears the current radio flap-list entries for a specific subscriber unit or all
subscriber units.
radio flap-list
insertion-time
Used for setting the radio flap-list insertion time.
radio flap-list
miss-threshold
Used for setting the miss-threshold for recording a flap-list event.
radio flap-list size Used for specifying the maximum number of the radio subscriber units to
be reported in the radio flap-list table.
show radio flap-list Displays the radio flap-list of a wireless modem card.