Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show interface radio alc
125
Cisco IOS Release 12.1(5)XM
show interface radio alc
To display the automatic level control (ALC) and power ranging configuration information for the
downstream, use the show interface radio alc EXEC command.
show interface radio slot/downstream-port alc
Syntax Description
Defaults No default behaviors or values.
Command Modes EXEC
Command History
Examples The following example shows how to display the ALC and power ranging configuration information for
the wireless modem card in slot 5, port 0:
uBR7200# show interface radio 5/0 alc
Power Ranging: on; Automatic power Level Control: on
Power SID Schedule interval = 100 ms;
IF Loop Mode = standard; RF Loop Mode = fast.
Power SID = 64:
MAC address MSID TSID ALC Primary SID
00e0.1eab.2c0b 0 0 1
00e0.1eb2.bb07 0 1 2
slot/downstream-port Specifies the slot and downstream port numbers of the wireless modem
card.
Release Modification
12.1(3)XQ1 This command was introduced.