Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show interface radio upstream
143
Cisco IOS Release 12.1(5)XM
show interface radio upstream
To display upstream port information for a wireless modem card, use the show interface radio
upstream EXEC command.
show interface radio slot/upstream-port upstream
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Examples The following example shows how to display information for the radio card located in slot 6, port 0:
UBR# show interface radio 6/0 upstream
Radio 6/0: Upstream 0 is up
Received 3699 broadcasts, 0 multicasts, 28586 unicasts 0 discards, 0
errors, 0 unknown protocol 21817 packets error-free, 2371 corrected,
8097 uncorrectable 0 noise, CBR_queue_depth: [not implemented],
ABR_queue_depth: [not implemented], UBR[1]_queue_depth: 0,
UBR[2]_queue_depth: 0, UBR[3]_queue_depth: 0,
POLLS_queue_depth: [not implemented] ADMIN_queue_depth:
[not implemented] Last Minislot Stamp (current_time_base):190026
FLAG:1 Last Minislot Stamp (scheduler_time_base):200706
FLAG:1
slot/upstream-port Specifies the slot and upstream port numbers for wireless modem card.
Release Modification
12.1(3)XQ1 This command was introduced.