Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show interface radio sid
134
Cisco IOS Release 12.1(5)XM
show interface radio sid
To display information about each service identifier (SID) information on the network, use the show
interface radio sid EXEC command. The information is displayed by the SID.
show interface radio slot/downstream-port sid [sid-number| counters [verbose] | connectivity]
Syntax Description
Defaults No default behaviors or values.
Command Modes EXEC
Command History
Examples The following examples show how to display information about each subscriber unit. The first example
shows how to display information for subscriber units 1 to 3. The second example shows how to display
information for SID 1.
CMTS01# show interface radio 6/0 sid
SID Status QoS Creattime Inoctets Inpackets IP address MAC address
1 enable 2 57 80139964 101336 1.1.1.5 00e0.1eab.2c0b
2 enable 2 57 49132 649 1.1.1.7 00e0.1eb2.bb07
3 enable 2 58 80042891 100555 1.1.1.2
CMTS01# show interface radio 6/0 sid 1
SID Status QoS Creattime Inoctets Inpackets IP address MAC address
1 enable 2 57 80140204 101340 1.1.1.5
Related Commands
slot/downstream-port Specifies the slot and downstream port numbers for the wireless modem
card.
sid-number Specifies the service identifier number. Valid range is 1 to 8191.
counters Displays information about a SID.
verbose Displays detailed information per SID.
connectivity Displays connectivity information.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
show controllers radio Displays all or a subset of attributes of a particular modem card.