Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio metrics-threshold-channel
72
Cisco IOS Release 12.1(5)XM
radio metrics-threshold-channel
To configure a limit on the percentage of error codewords threshold, use the radio
metrics-threshold-channel interface configuration command. When this limit is exceeded in a 1-hour
period, alarms are generated to notify the user. Minor alarms are generated and displayed on the console
when the specified 1-hour threshold is exceeded. To force the thresholds back to the default values, use
the no form of this command.
radio metrics-threshold-channel channel CERThresh |
no radio metrics-threshold-channel channel CERThresh | MINCodeword
Syntax Description
Defaults No default behaviors or values.
Command Modes Interface configuration
Command History
Usage Guidelines All link metrics are measured in codewords, where a codeword is a unit (228 bytes) of data transmission
over the radio link. The codeword contains user data, error counts, and collation information so that
successive codewords can be reconstructed at the receiving end of the transmitted data.
Examples The following example shows how to configure threshold for channel 2, such that if more than 10.05
percent of the received codewords in an hour are error codewords, the minor alarm is generated:
UBR04(config-if)# radio metrics-threshold-channel 1hour 2 999
channel Specifies the channel ID numbers, which are 0 to 3.
CERThresh Specifies the percentage of error codewords threshold.
MINCodeword Specifies the minimum number of codewords to be received by subscriber
unit.
Release Modification
12.1(3)XQ1 This command was introduced.