Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
debug radio p2mp phy cwrlog radio
179
Cisco IOS Release 12.1(5)XM
debug radio p2mp phy cwrlog radio
To view the digital signal processing (DSP) synchronization for a subscriber-unit modem card, use the
debug radio p2mp phy cwrlog radio EXEC command. To disable, use the no form of this command.
debug radio p2mp phy cwrlog radio
no debug radio p2mp phy cwrlog radio
Syntax Description This command has not arguments or keywords.
Defaults No default behavior or values.
Command History
Examples The following command shows how to view the DSP synchronization for a subscriber-unit modem card:
router# debug radio p2mp phy cwrlog radio
Release Modification
12.1(3)XQ1 This command was introduced.