Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio privacy tek life-time
80
Cisco IOS Release 12.1(5)XM
radio privacy tek life-time
To configure TEK life-time data privacy on the wireless network, use the radio privacy tek life-time
interface configuration command. To force the default setting, use the no form of this command.
radio privacy tek life-time seconds
no radio privacy tek life-time
Syntax Description
Defaults 43,200 seconds
Command Modes Interface configuration
Command History
Examples The following example shows how to set the privacy TEK life-time to 56000:
UBR(config-if)# radio privacy tek life-time 56000
Related Commands
seconds Specifies the TEK life-time in seconds. The valid entries are 1800 to
604,800.
Release Modification
12-2(3)T This command was introduced.
Command Description
radio privacy enable Activates radio privacy on the wireless link.
radio privacy
mandatory
Activates radio privacy and disallows access for any unencrypted wireless
subscriber units.
radio privacy kek
grace-time
Sets the radio privacy KEK grace-time.
radio privacy kek
life-time
Sets the radio privacy KEK life-time.
radio privacy tek
grace-time
Sets the radio privacy TEK grace-time.
show radio privacy
kek
Displays the KEK life-time and grace-time values that have been set.
show radioprivacy tek Displays the TEK life-time and grace-time values that have been set.