Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio flap-list size
48
Cisco IOS Release 12.1(5)XM
radio flap-list size
To specify the maximum number of the radio subscriber units to be reported in the radio flap list tables,
use the radio flap-list size global configuration command. To set the flap list table size to the default
value, use the no form of this command.
radio flap-list size size
no radio flap-list
Syntax Description
Defaults No default behaviors or values.
Command Modes Global configuration
Command History
Examples The following example specifies the flap-list size to 10:
Router(config)# radio flap-list 10
Related Commands
size The flap-list table size that is specified by the user. Valid values are 1 to
8191.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
clear radio flap-list Clears the current radio flap-list entries for a specific subscriber unit or all
subscriber units.
radio flap-list aging Specifies the number of days to record and retain flapping activity on a radio
subscriber unit in the flap-list table.
radio flap-list
insertion-time
Sets the radio flap list insertion time.
radio flap-list
miss-threshold
Sets the miss-threshold for recording a flap-list event.
show radio flap-list Displays the radio flap list of a wireless modem card.