Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
Configuration Tasks
6
Cisco IOS Release 12.1(5)XM
Configuration Tasks
This section discusses the following configuration tasks for the multipoint fixed wireless feature:
• Multipoint CLI Commands Classification
• Overriding the Default Microcode Path
• Configuring IF Loopback (Optional)
• Configuring RF Loopback (Optional)
• Setting the Power Levels and Frequencies
• Configuring the Automatic Level Control (ALC)
• Configuring the Modulation Profile for a Wireless Link
Multipoint CLI Commands Classification
The multipoint headend system CLI commands are classified as follows. Click on the link to go to the
list of commands under each class.
• Startup Commands
• Installation and Configuration Commands
• Verification Commands
• Operating Commands
• Monitoring Commands
• Troubleshooting Commands
Note This classification is made to help the user in chunking the commands. Some of the
commands can be listed under any of these groups.