Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show radio subscriber
158
Cisco IOS Release 12.1(5)XM
show radio subscriber
To display information about a radio modem card that is on the network, use the show radio subscriber
EXEC command.
show radio subscriber [ip-address | mac-address][access-group | detail | maintenance | offline
| registered | summary | unregistered]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Usage Guidelines The show radio subscriber command displays a list of options for a single radio modem to be specified
by entering either the radio modem card’s IP address or MAC address: summary display of the total
number of modems connected for each upstream channel, total number of registered and unregistered
modems for the specified interface or upstream, total number of offline modems for the specified
interface or upstream, and status for each offline modem before it went offline.
With Cisco IOS Release 12.1(5)XM or later, the show radio subscriber command includes all DOCSIS
states, as well as other useful troubleshooting information such as the maximum number of provisioned
customer premises equipment.
For each upstream channel, you can obtain the following information:
• The total number of modems
• The number of active modems
• The number of registered modems
• The number of unregistered modems
• The number of offline modems
IP-address Specifies the IP address of the radio modem card.
MAC-address Specifies the MAC address of the radio modem card.
access-group Displays access group information.
detail Displays detailed information on modems.
maintenance Displays the Station Maintenance Error Statistics report.
offline Displays information about connected modems that are offline.
registered Displays information about registered modems.
summary Displays information about all the modems connected to this interface.
unregistered Displays information about unregistered modems.
Release Modification
12.1(3)XQ1 This command was introduced.